Orgone VSTi

Orgone_full_large_0
Orgone_MOD_full
Orgone_FX_Full_0
Orgone_Envelopes_full_0
Orgone_SEQ1_full

$37.00

Sample Based Dual Synth with a zillion features and the ability to use any WAV files

Product Description

Astralis Orgone is a Dual Sample based Synthesizer which will run in PC VST Hosts. It is the next generation of the Astralis Range and is highly optimized with great improvements in CPU use and especially load times. 8 months of programming has gone into making these improvements and added many new features and GUI enhancements. It is a rounded synth capable of sounds ranging from Trance Style Rhythms to Hard Leads and excels at Pads, Atmospheres and FX.

Great care has been taken into developing a logical layout and many subtle & useful control features such as double click resets and CTRL fine control adjustments. Orgone can be purchased individually or as part of the Astralis Pack which  entitles the owner to both current and future Astralis instruments/effects with no extra cost.

There is also a version called Orgone Lite which is free.

Product Features

  • 2 Independent Synthesizer sections each having:
    • A Sampler which uses 16/24/32bit WAVS.
    • 150 wavs included.
    • Filter with Low Pass, Hi Pass, Notch, Band Pass, Peak A and Peak B modes cascadable up to 8 times.
    • Volume, Pan, Octave, Semi and Fine Tune controls
    • Auto Levelling Drive
    • Drive
    • White Noise
    • FX Send
    • Lofi
    • Normalize
    • Velocity Sensitivity
    • GUI Volume Envelope with up to 32 stages and repeating range.
    • Zone - Limit to a range of the keyboard
    • Pitch Bend Enable
    • Microtuner Enable
    • Glide
    • Filter Range Limit
    • Sample Reverse
    • Sample Loop Alternate Mode
    • Sample Loop Zero Crossing.
    • GUI Wave Display and Overlay for visually editing Loop Points and Start Position.
    • Unique Bank System for handling samples - Emulates a hardware Synth with Bank dropdown menu and a dropdown to select the sample from this bank. banks are simply folders of WAVs in the user selectable sample store location. Creating a bank is simply a case of creating a folder and putting some samples inside.
  • Refresh Files
    • Rescans the hard drive to find newly added files without restarting the Synth.
  • Polyphonic Gate Sequencer / Trancegate
    • 32 Note Sequencer with GUI buttons
    • 4 Modes - Forward, Reverse, Random and Alternate.
    • Polarity mode for Synth 2's gate can play All Off Notes, or First Off Note following an On Note.
    • Shift pattern left Right
    • Flip Pattern
  • Modulation Matrix:
    • 12 Possible Sources that can be mapped to 5 destinations from a choice of 31.
  • Gapper
    • Up to 32 Step sequencer to control the Gapper Pattern
    • 4 Modes - Forward, Reverse, Random and Alternate.
    • Release Time
    • Pulse Width
    • Attack Time
    • Mix Level
    • Shift pattern left or Right
    • Flip Pattern
  • Low Frequency Oscillator
    • 17 waveforms used through the Modulation Matrix.
    • BPM or Free Mode.
  • Fully Featured Arpeggiator/ Note Sequencer:
    • 17 Different Modes (more to come!)
    • Latch Mode
    • Pulse Width
    • Note Sequencer Mode with up to 32 steps
    • Note Enabler for skipping steps in any ARP Mode.
    • Range - Limit to a section of the Keyboard.
  • FX section:
    • Parallel Routing Mode and all possible combinations of chained effects (127 modes)
    • Reverb
    • Echo
    • Ring Modulator
    • Stereo BPM/Freeform Delay
    • Flanger
    • LFO based Filter with Low Pass, Hi Pass, Notch, Band Pass, Peak A and Peak B modes
    • Organic - Unique Delay Based effect
    • Compressor
    • 8 Band Graphic Equalizer
  • Polyphonic BPM based Modulation Sequencer:
    • Can be used via the Modulation Matrix
    • Has direct Pitch sends to each synth with many modes plus ability to send through the current Microtuner Patch.
    • Keyboard Range - can be limited to a section of the Keyboard.
    • Smooth Mode for creating legato or using as a virtual LFO
    • Secondary Raw Output via the Modulation Matrix
    • Shift pattern left or Right
    • Flip Pattern
    • GUI Slider Bars lockable to notes depending on selected mode.
  • Monophonic Modulation Sequencer:
    • As above but mono and without the Pitch Sends.
  • 32 Stage General Purpose Envelope
    • Used via the Modulation Matrix.
  • Spread:
    • Automatic Stereo randomization, switchable per Synth.
  • 4 Octave Preview Keyboard:
    • Can use Sticky Keys for easy hands free editing of patches
    • Can behave as a normal Keyboard
    • Animates all incoming midi data
    • Scroll Mode can be swicthed off in which case mouse left/right operates pitch bend, up/down the Mod Wheel
    • Midi Reset (Panic)
    • Midi Retrigger - Retriggers any incoming midi notes.
  • Sophisticated Randomization System:
    • A single Random Button is used to randomize all sections selected in the Randomization mixer.
    • 30 Sections are selectable.
    • FX has its own Randomize Button, will randomize only the selected Effects.
    • Randomization has been carefully limited to the most useful setting to ensure more chance of a usable patch.
    • Every control has its own min/max set to ensure a useful outcome!
    • Additionally Local Randomizers are everwhere throughout the synth for each section.
  • Microtonal Tuner:
    • Directly uses Scala Files.
    • Uses the same bank/patch system as the Sample System, folders can simply be added to the user selected MT Patch location.
    • Up to 127 Note Scales supported
    • Does not use Midi to retune like many other systems which means that Pitch Bend can be used with MT patches.
    • Octave Stretch for Acoustic Instrument Simulation
    • Root Offset Tuning
    • Hz Based Tuning
    • Has 4 Note Layout Modes to provide flexibility on how patches are used.
    • Unused notes switchable between last note or Octave note.
    • Switchable per Synth so for example Pythagorean tuning can be overlaid on the Eaqual Temperement for a harmonically interesting sound.
  • Default Settings:
    • Most controls have an in built default setting, generally double clicking will reset to this value.
    • Also each section has a Default Button.
    • There is a Master Default Button which will set Most setting to the default patch. as a simple starting point.
  • Information Display:
    • All controls display their current value when manually tweaked, usually in percentages.

Additional Information

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “Orgone VSTi”

Enable Javascript